Dryer Vent Cleaning in Beaumont, TX
Tell us about your home, and a licensed contractor who covers Jefferson County will get in touch.
Tell us about the job
It takes about a minute.
Step 1 of 3: Equipment
Lint sticks fastest on cold nights
Your dryer pushes out warm, damp air. On a winter night in Beaumont, once temperatures average 46°F from December through February, that air hits the cold walls of the vent and cools fast. The moisture in it condenses, and lint sticks to the wet spots instead of blowing on outside.
Each load leaves a little more behind. Over time the vent narrows, the dryer takes longer to dry a load, and the exhaust has less room to escape.
- 46°F
- the average winter night, and cold vents catch damp lint
- 5 months
- November through March, the vent stays cold
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec
NOAA nClimDiv, 1991–2020 normals
- How often should a dryer vent be cleaned?
- Once a year for most households. If you run big loads often, or your vent run is long with a few turns in it, once a year is still the mark to aim for but watch for drying times creeping up between cleanings. Lint builds up along the inside of the duct even when the lint trap looks clean, and that buildup is what a yearly cleaning removes.
- Can I clean my dryer vent myself?
- You can clean the first few feet near the machine yourself, but the full length of the vent usually needs more than a household vacuum can reach. Most vent runs go through a wall and outside to a hood, with bends along the way, and lint collects at those bends first. A contractor uses a brush and rod system built to reach the whole run and clear it out, including the hood at the end where lint often blocks the flap from closing.
- What are the signs of a clogged dryer vent?
- Clothes that take longer than one cycle to dry is the clearest sign. Others are a dryer that runs hot to the touch on the outside, a burning smell during the cycle, or little lint showing up in the trap even after a full load. Check the outside vent hood too. If the flap barely opens when the dryer runs, air isn't getting through and the line needs to be cleared.